LHF  Centrifugal clean water pump

Prodict Features:

LHF centrifugal clean water electric pump (hereinafter referred to as electric pump) is mainly composed of three parts: motor, pump and seal. The motor is an asynchronous motor; the pump and motor are equipped with single-end mechanical seals, and the fixed stop seal adopts "O"-shaped oil-resistant rubber sealing ring as static seal.

Product Usage:

Farm irrigation, sprinkler irrigation;
Garden sprinkler irrigation;
Vegetable greenhouse water supply;
Breeding water supply and drainage as well as well water lifting;
Tap water pressurization and other domestic water occasions;

Conditions of Use:

The electric pump should be able to work continuously and normally under the following operating conditions:
1. The temperature of the medium does not exceed +40℃.
2. The pH value of the medium is between 6 and 8.
3. The volume ratio of solid impurities is not more than 0.1%, and the particle size is not more than 0.2mm.
4, the power frequency is 50Hz, the voltage is single-phase AC 220V, three-phase AC 380V, voltage fluctuation range of ± 10% of the rated value.

*Note: Be sure to exhaust the air inside the pump before use, otherwise it will not be able to pump water.